You notice it on a straight stretch of road. Take your hands off the wheel for a second, and the car drifts left. Or right. Nothing dramatic, just a steady pull that means you’re always making a small correction without really thinking about it.
That pull is the most obvious sign your wheel alignment is out. It’s also the one people put up with the longest, because the car still drives and nothing is actually broken.
The problem is what it’s doing to your tyres while you wait.
What wheel alignment actually means
Your wheels aren’t bolted perfectly straight. They sit at precise angles, set by the manufacturer, and those angles control how the car tracks, how it responds to steering, and how evenly the tyres wear.
There are three of them. Camber is how far the top of the wheel tilts in or out when you look at the car from the front. Toe is whether the wheels point slightly towards each other or away, viewed from above. Caster is the angle of the steering axis, and it’s what makes the wheel return to centre after a corner.
All three are measured in fractions of a degree. A few millimetres out at the wheel is enough to scrub rubber off a tyre over a few thousand kilometres.
Signs your wheel alignment is out, beyond the pull
Uneven tyre wear. Run your hand across the tread. If one edge is noticeably more worn than the other, that’s a camber or toe problem showing itself.
The steering wheel sits crooked. You’re driving straight, but the badge in the middle of the wheel is off to one side.
The steering feels vague. The car wanders slightly, and you’re making constant small corrections without noticing you’re doing it.
It doesn’t return to centre. After a corner, the wheel should come back on its own. If you have to feed it back, the caster may be out.
A pull on its own can also come from uneven tyre pressures or a dragging brake, which is why a proper check looks at more than just the alignment angles.
What knocks wheel alignment out on WA roads
Alignment doesn’t shift on its own. Something moves it.
Kerbs are the usual culprit, particularly the one you clip at low speed in a carpark and barely register. Potholes do it too, and so does the corrugation on an unsealed road, which works at the suspension in a way bitumen never does.
If you spend time on gravel, whether that’s a station track up north or the run into a camping spot down south, your alignment will drift faster than someone who only drives sealed roads. The same goes for anyone who’s recently fitted new tyres or wheels, lifted a 4WD, or had suspension work done.
Why it’s worth fixing promptly
A set of tyres is a significant purchase. Driving on bad alignment can take thousands of kilometres off their life, and the wear is often one-sided, which means you’re replacing tyres that still have plenty of tread on the other edge.
There’s fuel use too. Wheels fighting each other create drag, and the engine works harder to overcome it.
And there’s the handling. A car that tracks straight responds more predictably when you need it to, which matters most in exactly the conditions where you’re least likely to be thinking about your alignment.
How often should you check your wheel alignment?
Once a year is a reasonable baseline for a car that lives on sealed roads and does ordinary suburban kilometres.
Beyond that, there are four moments worth booking a check regardless of the calendar. Any time you fit new tyres, because starting a fresh set on bad alignment wastes the investment immediately. After any suspension or steering work, since those components set the angles. Straight after a solid kerb strike or pothole, rather than waiting to see whether anything develops. And before a long trip, particularly one that involves unsealed roads.
What happens during a wheel alignment check
We put the car on an alignment machine, measure all three angles on each wheel, and compare them against the manufacturer’s specification for your vehicle. If anything sits outside tolerance, we adjust it back.
It usually takes under an hour, and the before and after figures are there in print so you can see exactly what moved.
If your car is pulling, it’s worth getting looked at before your next set of tyres rather than after.
Book a wheel alignment at your nearest Tyrepower store, or ask us to check it while your tyres are being rotated.